(Déjà vu all over again!) Before I get into that, a little story So I had finished doing all the work on the machine. It was up, it was running, it was doing fine. Little did I know that Susan Thunder has left me a surprise! It had been running for days without incident. I took the time to do…
Category: racsiii
Discussions about RACS III
Change in Machine Cleaning and Home Technology
(Or maybe the video below) Geez, I actually remember I’m actually old enough to remember MTV when it came on the air. I specifically sat and watched it. I wanted that excitement and feeling about this post. Too bad the first video wasn’t appropriate. Not because of lyrics, nudity, etc. Because it was called, appropriately, “Video Killed The Radio Star”…
Disk Drive Dilemmas: Tech Triumphs and Tribulations
(Holding at T-minus one) NOW whats the holdup Tuc? So I was just doing some of the final prep to get things going, when I ran into an issue. I was trying to make a backup of my boot disk for the 0 drive. Given the age, possible alignment and head issues, I wanted to have a few backups of…
A Thank You Note To Everyone Who Made This Possible
(And I hope I didn’t leave anyone out!) There are plenty of people to thank. This was not a solo project by any mean, all of the members deserves a “Thank You!” Thanks to Ira Owner of the TRS-80 website. This is the predominant source for anything Tandy computer related. I’ve known Ira since I first got my Model I.…
Network Connectivity: From Local Lab to Global Reach
(Not going to be published in this article) My address – 192.168.33.247, Apartment 2323 If you’ve been following this closely. And I know not even my mother has been), the whole point of this project was to get this working to be available over the internet. It now works in my lab at telnet://192.168.33.247:2323 , but how to make it…
TRS-80GP Debugger: Debugging Adventures and Triumphs
(I’ll even take 9600 7E1) trs80gp comes to the rescue! So I started to read the RS-232 manual to see whats going on. I started to wonder if at some point during the whole thing the driver maybe was hardcoded to go 300. I didn’t want to believe this, since I did move from 300 to 1200 with the Dataphone…
Troubleshooting TRS-80 Serial Communication Woes
(Open the flood gates) ROGER. BCS ARM switch is on So, this is it. The moment we all (Ok, maybe just me) waited for. I’ve spent nights and weekends working to get to this point. I’ve cleaned, tested, retested, POC’d, and got everything tested by itself. Now, it’s time to see all of them work together. SO – This is…
Yes Virginia, there really is a hard drive
(Yes, honest, no more tricks. 😉 ) Let’s just dive in! You might want to get a cup of coffee, this is going to take a while. And, I regret to inform you, there will be math. When I first got the boot disk copied by Ira, it had the following pdrive information – So for anyone that knows me,…
Serial Communication: Raspberry Pi and Lantronix EDS2100
(Did my temporary distraction help?) Ugh, even more nonsense? So turns out that I only have a few articles left in the series, and didn’t want to do the 2 serial ones back to back Raspberry Pi and Lantronix, so put in my bit about behind the curtain to stall a little. 😉 Raspberry Pi WASN’T the win I thought…
Behind the Scenes: My Organized Communication Project
(As if Reality TV is real. 😉 ) Can I EVER be trusted again? So I need to let you in on a little secret. Things really haven’t gone EXACTLY as I’ve said here. Yes, I know, astonishing!! I admit I’m actually not as organized, not as waterfall about doing this as it might come across. I’ve actually had a…